Dry goods collection for daily maintenance of construction machinery
Time : 2025-11-25
With the continuous development of domestic infrastructure construction, the scope of application of construction machinery equipment has gradually expanded. Because in the actual use stage, construction machinery equipment will be affected in many ways, thereby causing the damage of different parts, and if it cannot be repaired and maintained in a timely manner, the economy and suitability of the equipment will gradually decline.
In the daily management of construction machinery equipment, it is necessary to do well in the maintenance of machinery and equipment. In actual maintenance work, periodic inspection of machinery and equipment should be carried out, and in the periodic examination, accurately record the maintenance management of actual equipment and the presence of related problems. Report the actual problems to the relevant departments for equipment repair, and strictly follow the corresponding norms and requirements during the actual equipment maintenance phase, and form some periodic maintenance checks during the real equipment treatment. Usually this periodic maintaining check is once a month.
In addition, mechanical equipment maintenance managers must maintain certain management and maintenance records. In order to maintain the actual equipment in order to be able to carry on the comprehensive understanding to the actual equipment situation, is advantageous for the early detection equipment in the existence breakdown question, then promptly adopts the corresponding equipment service plan to carry on the processing to the equipment breakdown, thus effectively guaranteed that the equipment may be in the best operating state.
Precision equipment maintenance is very important in daily equipment maintenance, and in daily equipment management, it is necessary to treat the equipment with precision according to certain specifications. Precision work maintenance is mainly to adjust and set the operation parameters of the equipment appropriately, and further maintenance of the equipment can be achieved in the actual parameter adjustment and setting stage.
In addition, in conducting precision maintenance work, we must also do peripheral equipment maintenance work. It is affected by the actual construction environment, and the equipment is easily corrosion and rust in severe weather and environment. Therefore, it is necessary to conduct certain maintenance management of the equipment, and also to do the corresponding work of waxing the equipment, so as to effectively avoid the mechanical equipment being affected by the outside environment, which will have a bad impact on the normal operation of the equipment itself.
Routine maintenance is mainly the maintenance work carried out on mechanical equipment in the daily equipment management and maintenance phase, and usually the daily maintenance work mainly performs ordinary lubrication on the equipment to ensure that the equipment components speed up operation with the effect of lubrication. Therefore, in the actual daily work, some routine maintenance of the equipment must be carried out, and the corresponding equipment maintenance work must be comprehensively followed during the maintenance period. In the routine maintenance of machine equipment, we should also do a good job in the regular maintenance of the equipment, at the same time according to the project management maintenance code for the actual equipment waxing, oiling, lubricating, to ensure that in the daily maintenance work to further extend the life of the equipment.
In the actual machinery and equipment use stage, it is very important to do routine equipment maintenance work, which can not only provide adequate safeguards for the safe and stable operation of equipment, but also create more value for construction units in the premise of safe production.
Specialized maintenance mainly refers to specialized maintenance carried out during the operation phase of mechanical equipment in conjunction with the operation of actual equipment. Generally, when the equipment is operating for 600 to 3000 hours, it must be performed accordingly for specialized maintenance, which means to clean and dismantle the equipment parts accordingly.
In addition, the fine parts of the equipment must be oiled, waxed, and lubricated accordingly, so as to effectively ensure the stable operation of the equipment and increase the actual service life of the equipment. Furthermore, during specialized maintenance, the maintenance of the motor operation system should be done to ensure that the motor system is not affected by equipment failure and is not interrupted. Finally, specialized maintenance work should also strengthen the maintenance treatment of damaged parts and components, and promptly repair and replace damaged components if they can continue to be used, so as to prevent damage to equipment components from causing inconvenience to actual construction.
Maintenance of important components
During the operation phase of machinery and equipment, many important components also need to be done daily work maintenance so that the normal operation of the equipment is not affected. Generally speaking, the important components in machinery equipment are mainly blender motors, bearings, crane pulleys, etc., which are often used in the operation of actual machinery equipment. Therefore, the maintenance of these important components should also be strengthened in daily maintenance and maintenance. In the maintenance of important parts, these machinery should be oiled and cleaned regularly, for example, in the maintenance management stage of daily machinery, the bearing should be oil-lubricated so that the bearing can maintain accelerated operation, thereby ensuring the rapid operation of the machinery as a whole.
In addition, in the cleaning stage of the engine air filter, professional steps should be strictly followed to clean the cylinder, so as to ensure that the gas operation and exhaust system in the cylinder are not affected. At the same time, in the actual cylinder maintenance, high-quality lubricating oil of excellent quality must be used to ensure that the lubricating fuel plays a full role in the cylinder.
In addition, the various parts around the cylinder should be properly cleaned in conjunction with the actual cylinder cleaning conditions. Generally, the peripheral components of the cylinder are mainly the water tank system, the diesel filtering system, etc. Only by ensuring the good operation of these important components can they play a full role in the operation of the actual machinery and finally the stable operation of the university that promotes the project.
Guangzhou Tianhui Maintenance Operation Requirements
(1) Machine operators and maintenance personnel must be trained and qualified; No persons unrelated to the ongoing maintenance and repair work are permitted to enter the work area. Special guards may be appointed if necessary.
(2) Vehicle repairs are carried out according to procedures. If a vehicle is repaired, parts are assembled and dismantled, first determine the commander of its operation, formulate its operation procedures, and carry out a step-by-step operation.
3. Require operating clothing with tight cuffs and trousers: Safety glasses should be worn. (Figures 1-72)
Use correct repair tools and do not use damaged, low quality tools. To prevent personal injury, always reduce all working devices while in transit, stop the engine when repairing, pull the stop brakes, and wedge the car. (Figure 1 - 73)
5. Notice what the sign says. With regard to matters of particular importance, vehicles are marked with signs and should follow their instructions. If signs are found to be peeling or polluted, they should be subsidized or cleaned.
6. Before performing maintenance work, paste a label labeled "Do Not operate" or other similar warning labels on the start switch and dashboard. Prevent others from starting the engine or operating the lever. (Figure 174)
7. Specify a person in charge before the removal or installation of the attachments begins.
8. Fuel oil and oil are dangerous items. Fuel oil, oil, grease and oily cloth must not come into contact with any open fire or flame.
9. Smoking is strictly prohibited when refueling or checking the power supply. (Figure 1 - 75)
Keep the accessories removed from the machine in a safe place and make sure the accessories do not fall. Place a railing around the fourth of the annex with a "no-go" sign to prevent people from approaching without consent.
11. No non-staff members are allowed near machines or accessories.
12、 The surrounding area of the workplace should be kept clean and tidy, and there are no scattered oilcloths, lubricating oil (fat), etc. to prevent fires and people from falling.(Figures 1 - 76)
13、 Use clamps to secure the front and rear frames before inspecting and repairing the car.(Figures 1 - 77)
14. When the vehicle is raised, no one may enter the other side of the vehicle.
15、 Before lifting, wedge the wheels from the opposite side.After lifting, place a cushion under the machine. (Figure 1 - 78)
16. Do not undertake on-site modifications that affect the performance, safety and strength of vehicles and operational equipment. (Figures 1 - 79)
17. When operating in a building, a fire extinguisher should be set up first and remember where to store it and how to use it. (Figure 1-80)
In the new era, the scientificization and automation of machinery and equipment continue to improve. In order to further control the actual engineering production, it is necessary to strengthen the maintenance and maintenance work of machinery and equipment, and to increase the performance research of various machinery and devices to ensure that they operate in a safe and stable state, eventually bringing some help to the actual engineering management.
EN
ONLINE