Kubota excavator maintenance time and explaination of maintenance parts replacement process

Recently, I received a lot of friends asking about the maintenance time of the machine.Parts Maintenance Replacement, cleaning, maintenanceLet me now take a look at the Kubota diggers as an example.Please strictly follow the requirements of the equipment manufacturer andRelevant regulations stipulate standard operating conditions and ensure the maintenance and maintenance of the machine.

oneMaintenance of the new machine: The first 50 hours of service of the new car are as follows:

The oil is replaced for 50 hours and every 250 hours after the second time.

2, The final transmission gear oil is replaced for 50 hours and every 500 hours after the second time.

3, drainage of the diesel tank.

4, Apply resin to the root of the rotary support tooth.

5, inspection and adjustment of the track.

6, Air conditioning belt tension check.

7, Fan belt tension check and adjust.

II. Use200 hours of maintenance such as:

The pivot supports the injection of fat at the ballpoint.

3. Use250 hours of maintenance is as follows:

1，Clean the empty filter, check it.

2，Examine the hoses and tubing of the radiator water tank.

3，The air conditioning filters are cleaned and inspected.

4，Clean the air conditioner condenser.

5，The second time the oil was used.250 hours to replace.

4. UseThe 500-hour maintenance is as follows:

1，Hydraulic oil filter500 hours of replacement;

2，Fuel filter (diesel filter)500 hours to replace.

3，Oil filter500 hours to replace.

4，End drive transmission gear oil500 hours to replace. From now on, it will be replaced every 500 hours.

V. UseThe 1,000-hour maintenance is as follows:

1, Replacement of hydraulic oil.

2, Replacement of the hydraulic lubricating filter in the hydraulic oil tank.

3, Replacement of hydraulic pre-filter.

5，Replacement of the hydraulic oil ventilation filter.

6，The replacement of the fan belt.

7，Replacement of air conditioning belts.

8，Replacement of internal and external air filters.

6. Use2000 hours of maintenance is as follows

1, Repeat the basic maintenance above.

2, inspection and maintenance of spare wheels and steering wheels oils.

3, inspection and maintenance of alternators and starter motors.

4, Every 1 year of service: Check the air conditioning pipes and hoses and find wear or damage, replace them promptly.

5. Maintenance for every 2 years of use: Replacement of coolant. Please be aware of hot water in the tank to prevent scalding. Be aware of the release bolts in the lower part of the tank. The release of a side tank requires the removal of the side tank and the opening of the lid to pour out the water. And clean the water tank.

6. Cautions regarding the use of antifreeze: Do not mix different brands, long-lasting coolant is a maximum of 2 years; The mix ratio is half each.

If you have an encyclopedia of Kubota, Yamato, Mustang, Fukushima, Carter, platinum engine series assemblies and parts, no two ways,KYBH ydraulic pumps by brands such as Rexroth, Danfoss, Eaton, Kawasaki and others Walk back and forthA full list of motors and prices, quotes, configurations, models, forums, comments from netizens, technology Parameters ,product Pictures,product Offers, supply and demand information,Repair Main tenance,use Operation, repair, warranty, partsSale，main tenanceinspect，Demolition and  installation,common Problems, malfunctions Reason Oil leak, high temperature cleaning tank,operation Process,Repair Standards, Parameters Be nothing wonderful Technical materials, part manuals, maintenance methods, experience sharing, communication, after-sales service, technical support, detailed parameters, real-time quotes, market trends, wholesale of high-quality goods, supply information Technical support Either way.#Contact Shanghai Hangkui Construction Machinery Co.Ltd