CAT M315GC Iyan waya na klasik, sauya sababni

Bayan fikir

Yana inganta aiki kuma yana reduce the cost of daily use.

Za a sami kyau daidaitacciyar wani abu mai tsada dusta kuma controls masu saukin amfani na Cat M315 GC Wheel Digger suna inganta kiyaye kuma kiyaye, suna taimakawa wajen amsa ayyuka daga zuwa. Kudaden maintenance da kudaden fuel consumption suna taimakawa wajen rage kudaden ku.

• An built shi don ayyukan kowace rana

M315GC ita ce abokin kuɗi, sauyin amfani, kuma ta offer dalilin da kama da durability expected of Cat ® products.

• Tacewar aiki

M315 GC tana inganta productivity made 10%. Enhanced excavatoring power tana taimakawa wajen amsa ayyuka daga zuwa.

• Inganta earnings

Kudaden maintenance costs da gas consumption, increase operating time kuma maintain low costs.

• Made 10% CO2 emissions suna even lower

M315 GC tana bauta made 10% less CO2 than the previous M315D2.

Alamar zaman kansu

Na'asa: ● Taimakon: ○

Ƙarfin wutar lantarki:

Maximum turning torque 34 kN · m

Gravity 71 kN

Dipper digging force - ISO 69 kN

Arm Digging Force - ISO 83 kN

Iyaka mai kyau zuwa babban doki 60%

Sauri:

Zurfi na kwanciyar 11.5 r / min

Forward / Reverse - 1st Gear 9 km / h

Forward / Reverse - 2nd gear 37 km / h

Crawl speed - 1st gear 6 km / h

Crawl speed - 2nd gear 15 km/h

Iƙama ɗin karaɓa:

Karaɓa ta mai amfani - 2000/14/EC 71 dB (A)

Karaɓa ta mai duba - 2000/14/EC 102 dB (A)

Ma'adinun na'ibin ainihin halitta:

Actuator: ISO 3450: 201

Vibration Class - Maximum Hand/Arm Vibration - ISO 5349: 2001:

<2.5 m/s² (<8.2)

Vibration Class - Maximum Vehicle Body - ISO/TR 25398: 2006:

<0.5 m/s² (<1.6)

Sakon Lauya / FOGS:

ISO 10262:1998 da SAE J1356:2008

Tsarin yin amfanin kwalin:

Mudili na injin: Cat C4.4

Alamar bakiyayi: Country IV

Yanayin sama mai zurfi: 3000 mm

Nau'in hankali:

Yanayin sama mai zurfi:

Tsarin kayan aiki - normal 35000 kPa

Tsarin machini - Ninka Babba 35000 kPa

Tsarin machini - tsarin runawa 35000 kPa

Tsari na yau - tsari mai girma 35000 kPa

Tsari na yau - kayan aiki mai dabara 25900 kPa

Nau'in tsarin tsari:

Yawa mai uku - Kayan aiki 245 L / min

Yawa mai uku - 180 L / min a cikin tsarin tafiya

Tsari na yau - tsari mai girma 100 L / min

Tsari na yau - kayan aiki mai dabara 122 L / min

Takarda mai rago:

Silinda ɗin Boom (Tsumbunta) - Bore 105 mm

Silinda ɗin Boom (Tsumbunta) - Stroke 932 mm

Silinda ɗin Rod - Bore 95 mm

Silinda ɗin Rod - Stroke 939 mm

Silinda ɗin Bucket - Bore 115 mm

Silinda ɗin Bucket - stroke 1147 mm

Abubuwan aikin ayyuka:

4.4m integral boom

● 2.2m rod

●312 مم ساسوبيت نايلمайي

● 0.65 m3 Bucket - Nau'in Wutar Na'ura

Yawa: 490kg

Radius na kofar tushen dubbai: 1225 mm

Tsawon: 1050 mm

○ Kudaden 0.2 m3 - Kudaden Tsoho

Abu: 291 kg

Tsawon: 450 mm

○ Makaranta mai tsauri na hydraulically 100 ~ 115mm

○ CVP75 Mai ninya da ke kara abu

Nau'in juyawa da tsari:

Anbuba masu yankin standa 10.00-20 (biyu masu yanki)

Raiyayar tafiya kama-kaman - 6750 mm anbuba bên

Raiyayar tafiya kama-kaman - karo mai ƙaranci na integral boom 7950 mm

Yawan digiri na alkwabra ta swing shaft ± 9 °

Yawan digiri na yawan karo 35 °

Tafarar sama 360 mm

Ganuwa na tafin:

Rukunin ganuwa

Width 2490 mm

Tallin girma na blade 583 mm

Tallin kama daya na blade 610 mm

Tafini mai yawa 610 mm zai iya kara ta furta daga tafin

Tallin yawa daga tafin 475 mm

Almashe na kayan aiki

Boom 2600 kg

Kayan dauke (tuntube na kankara, kayan haushi, saduwa da nisa da maɓallin gidan zuma)

633 kg

Dauke 2600kg

nukarin chasis (tuntube na gaba, tuntube na yanzu da ladder)

4299 kg

Tuta 490 kg

Mai haɗawa mai sharhu 187 kg

Zaune da ruwa suna buga:

Shinon kankara 250 L

23 L mai tsanniya

Zuma mai amfani da injin 15 L

Tangin Madin Kwallo 98 L

Nunin da ke tsauawa ta kwallo - yana haɗawa da tangi 230 L

Tsakiyar Behind - Takardar (Mai Dabin) 11 L

Tsakiyar Front Steering Shaft - Mai Dabin 9 L

Final Drive 2 L

Power Shift Gearbox 3 L

Nau'in nisa:

1 Talla na Sayarwa 3245 mm

2 Tsawon Sayarwa 7920mm

3 Alamar Amincewa 2414mm

4 Shakin gyara bisa 2190 mm

5 Tushen karamin kwana 1264 mm

6 Takaingin Dogon Makwabta:

A cikin sauri mai daki 3131 mm

Tare da sauri mai daki 3245 mm

7 Girman mashefin (tare da blade) tare da tayaros 10.00-20 2540 mm

8 Girman mashefin sama 2490 mm

9 Tsawon makwabta a wani mataki 3675 mm

Girman tsarin chasis (tayaros double inflatable 10.00-20):

10 Jimlar tsawon chasis 4846 mm

11 tsakanin guleri 2800 mm

12 Tsarin alawa na slewing zuwa tsakanin gaba 1700 mm

13 Tsarin alawa na slewing zuwa tsakanin gaba 1100 mm

14 tsakanin gaba zuwa saituna mai dawowa (karo) 1168 mm

15 yawan girma na saituna 2490 mm

Girman saituna mai yawa 108 mm sama da fara

16 Talla ta kasuwa (wani dare) 2535 mm

17 tushen saituna (mai dawowa) 474 mm

18 tushen tsakanin gaba 360 mm

Ma'ana na aiki:

Mai haɗin kari ko dai ko waye Yes Yes

1 Talla mai yawa na korewa 8254 mm 8392 mm

2 Tsawon yin ruwa mai iyaka 5892 mm 5722 mm

3 Ƙaramin girma mai iyaka 4624 mm 4795 mm

4 Ƙaramin girma mai iyaka na vertical wall 3777 mm 2962 mm

5 2440 mm Ƙaramin girma mai iyaka tare da satar waje 4361 mm 4556 mm

6 Ƙaramin farafara mai iyaka 7941 mm 8112 mm

7 Ƙaramin farafara mai iyaka - sama 7739 mm 7914 mm

8 Sauran tsawon yin ruwa 2394 mm 2223 mm

9 Sauran abben gurbin front 2600 mm 2600 mm

Saitin aiki

Abubuwan aikin ayyuka:

• 4.4 m (14'5") Yankin kai

• 2.2 m (7'3") Karamin kai

○ Hukuna na shafar, 312 Series babbu keren

Nau'in karkashin batiri:

• Alatakawa na LED a kan tsakiya da wajen sauƙi

• Alatakawa da alamar alatatu na gaba da nisa

• Batiri ba za a bukata gyara komai

• Matsin gyara elektarikun tare da ekwiti

○ Alatakawa na LED a kan chasis (dakka)

Pampin bauta na elektariku

Mai amfani da shi:

• Cat ®C4.4 injin na dizel mai turbocharged mai tauna

• Zabin yanayin kwana

• Aiki mai yawan giniyar hannu na farko tare da gwagwarmayar injin

• Sake shuts down na iko

• Za a iya yin amfani da shi a sama zuwa zuwa 3000 m (9840 ft) baya lafiya na injin.

• tsarin hadara mai tsawon 52 ° C (125 ° F)

• Filtarin bayyan gini biyu masu haɗin prefilter

• Pampin injan na kudaden elektarik

• Za a iya amfani da Biodiesel zuwa zuwa B20

○ -18 ° C (-0 ° F) iko mai kyau

○ -25 ° C (-13 ° F) iko mai kyau

Nau'in hankali:

• Abubuwan gini, tafki, da bukku masu daina

• Ilimi na elektronik na uku

• Nau'in filtarin filtarin hydraulic na uku

• Sake dawo na iko

• Zama mai tsayin hydraulic da za a iya canza

○ 1 slider to manipulate the handle

○ Tsinkon yin amfani na uku

○ Mai tsoro mai tsoro (wani-way / biyu-way girma girman flow, an kashe sinking)

○ Takiya na Quick Connector don Cat Pin Gripper

Abubuwan tsaro da doro-doron:

• KAMERA NA TSAYI

• Nuni / burin alarma

• Lever mai nema na karkashi (lock) ga duk wadannan na'urar aiki

• Switch mai tsoro ga mesin gida a cikin kab na iya samunsa nehe

• Gudanarwa game da wasan gwaji da buckles a kan platform

○ Kamarai dama

○ Alarmu na tarbiyya

○ Alumos na kwakwalwa a cikin kab

○ Cat Asset Tracker

Gudanawa da gyara-gyaran:

• Tattaunawar ma'auni na mayi zarafi (S. O. SSM) sampler

Takamumin CAT:

• Hanyar produkatin Cat

Nau'in juyawa da tsari:

• tsara gaba daya

• Kwana gama / kwana kwaya

• Sabin kula

• Kwana elektronik da kwana na yakin gudu

• Kwayoyin masu zafi, tsarin kwana masu zurfi da mota'una, iko da zaune

• Kwayoyin farko masu zafi, masu kwana, tare da alamuwa masu rage

• 10.00-20 16 PR, Tuyuni biyu

• Rajenkeji a cikin tsarin chasis tare da makole mai amfani a dama

• Shaft na biyu

• Tsarin kogin na 'dual-speed static hydraulic'

• Tsarin chassis na bakin shafar mai da shafar gajere

• Fender na gitara da na yamma

• 2600 kg (5730 lb) counterweight

○ Tsaro na shaft na kogin

○ Gwamnati na zafi

1. Ida’uwar kai tsaye ta wayar wura sabon gurbin aiki:

• Raba wayar wura har zuwa ga 10% dibu da M315D2, taimakawa ku samun aiki mai kai tsaye da kai tsaye a wurin aiki.

• Mesin ya kasance mai kyauyuwa, ta ba da iko mai zurfi na sayarwa da aiki.

• Rabuwar wayar wura da karyayar karfi suna taimaka wajen inganta manyan nau’i na alamar aiki.

• Mesin ɗin Cat C4.4 ta kai tsauraran yankin China Na IV wanda ba tare da hanyar jirge.

• ProductLink tana iko kuma zarin amfani don duba halayen mesin, wurin shi da kariya.

• Tsarin hidrolik mai alƙawari yana samun taron mai kyau tsakanin quwat da kwayoyin aiki, kuma yana ba da abubuwan masaukin kontininta don kai tsauraran buƙatar gurji.

• Zaɓuɓɓukan hydraulic na iya bawa ku taimakawa don iya amfani da rashin alamar Cat.

• Maimakon gaske game da girman ruhani kuma saka kansa cikin aikin ku. Zukan za a iya aiki cikin girman ruhani mai tsawo zuwa ga 52 °C (125 °F).

2. Kudawa biyan amfani:

• An tsoro rashin biyan karancewa zuwa ga 15% dibu da M315D2.

• Za a iya gyara abubuwan da ke bukata gyara na kowaci daga sama don samun tabbatar da gyara mai sauƙi.

• Sabon filtarin zuma na hidrolik yana ba da tasiri mai zurfi, kuma dabam birnin zuma yana kama zuma mai kyau lokacin da filtaran an canza shi, kuma tsakiyar canje-canje ita ce zuwa ga 2,000 sa’a na aiki, wanda yana bada mako mai tsada.

• An tsawon lokacin aikin sakawa kuma an klasifikaƙi alamar nufa, wanda ya kama da tonkwakar kashewa kuma ta taimaka wajen aiki da yawa.

• Abubuwar ƙasaɗin S · O · SSM sun fito sama, sannan ta sa ayyukan gyara-sayarwa su farfeta kuma ta ba da damar zatta da sauƙi don ruwa mai tadinta.

• Tattare da abinda aka fiyi da rashin kuskure a fahimtar masin aiki masu iko, abubuwan dabi'un muhimman mutummasu suna taimakawa wadansu abubuwan dabi'u su dace da ma'auni na Caterpillar.

3. Aiki kyauta cikin cab sabuwar bura:

4. Yato yake:

• Yi amfani da butoni mai tsakanar fara don fara masin yanke waye sosai.

• Yi amfani da kayan amfani masu damar samunsa da sauƙi don amfani da wannan masin yanke waye mai doro-daro da sauƙi.

• Zane-zane na touch screen masu kyau (203mm (8in)) don nema mai kyau.

• Pedal na biyu na yin aiki ita ce masu damar amfani da sauƙi, ta kama taimaka wajen samun abubuwan da aka hada masu kama zuwa ga yawan abubuwa.

5. Alamar tsaro:

• Albarkatu na yau da kullum da abubuwan lissafi suna da sauƙi a cika kuma suka yi lafiya sosai.

• Anasun LED masu alaƙa suna ba da ku fahimtar wurin aikin mai zurfi.

• Tare da kayan siffa mai yawa, takamairi mai yawa, da nisa mai nisa mai nisa mai nisa, masu amfani suna da fahimta mai zurfi, bisa gabata, bisa kowane hanyar zinzaye, kuma bisa baya. Kamera mai nema bisa baya da kamera mai nema bisa gaban takama.

• An kirkiri mai tsada gina don baya da damar sayarwa, safe da sarari zuwa sama mai tsada gina; Ana amfani da plates na slippery perforated don hana sauya.

• An kula luburikation points domin yadda zai iya yi lubrication mai tsada gina da kuma sarari.

• Yi amfani da PIN code a kan monitor don baya butun yi aiki.

• Wutar reverse tare da sauyawa ta hanyar farko bayan ku ke tsayawa.

• Kullum da aka girma sakon downtime na gini, zai kashe kuma kulle sadarwar abubuwa zuwa wutar engine kuma ta shutsa mesin.

• Mabambantan biyu suna tabbata safe mai tsada gina.